SimXPro DD Front Mount: Compatibility and Installation FAQ
By SimXPro l Sim Racing Shop | Published: 2026-10-29
Category: How-to Guides
Get answers to common questions about the SimXPro DD Front Mount, including compatibility with 580mm and 600mm cockpits, installation steps, and tips for a rigid setup.
Quick Answer
The SimXPro DD Front Mount is designed for cockpits with an internal width of 580mm or 600mm and works with most front-mounted direct drive wheelbases. Follow the installation steps below for a secure, rigid setup.
Why front mounting matters for direct drive
A front mount transfers the forces from a direct drive wheelbase directly into the cockpit's structure, reducing flex and improving steering feel. The SimXPro DD Front Mount uses a 6mm hardened steel plate and reinforced brackets to keep the wheelbase stable, even under high torque.
If your cockpit has an internal width of 580mm or 600mm, this mount is designed to fit. It's a solid choice for sim racers who want a dedicated front-mount solution rather than a side mount or universal wheel deck.
Compatibility considerations
The mount is compatible with most front-mounted wheelbases, including popular models from Simucube and VRS. However, not all wheelbases are designed for front mounting—some require a side mount or a specific adapter. Check your wheelbase's mounting pattern and manual before purchasing.
Also, measure your cockpit's internal width carefully. The mount is available in 580mm and 600mm versions, so confirm which one matches your rig.
Installation and Compatibility FAQ
- How do I know if the mount fits my cockpit?
- Measure the internal width of your cockpit between the two uprights or side rails. The mount is available for 580mm and 600mm widths, so choose the version that matches your measurement. Always double-check the internal width before ordering.
- Which wheelbases are compatible?
- The mount is compatible with most front-mounted wheelbases, including models from Simucube and VRS. Check your wheelbase's mounting pattern and manual to confirm it supports front mounting. If your wheelbase doesn't support front mounting, consider a side mount or universal wheel deck.
- How do I install the mount?
- First, attach the mounting plate to your wheelbase using the appropriate bolts. Then, position the reinforced brackets on the cockpit's front uprights at the correct height, and secure them with the provided hardware. Tighten all bolts to the recommended torque. Ensure all bolts are torqued to spec to prevent flex or movement.
- Can I adjust the height or angle after installation?
- The mount allows for height adjustment by sliding the brackets along the uprights before tightening. For angle adjustment, consider using spacers or shims if your wheelbase doesn't have built-in tilt. Loosen the bolts slightly to adjust, then re-tighten securely.
- What if my cockpit width is not 580mm or 600mm?
- The mount is specifically designed for these widths. If your cockpit has a different internal width, you may need a universal mount or an adapter plate. Measure carefully; using the wrong width can cause instability.
Product Facts
- SimXPro DD Front Mount Universal 580 - 600 mm: The SimXPro DD Front Mount is designed for cockpits with an internal width of 580mm or 600mm and uses a 6mm hardened steel plate with reinforced brackets. This ensures a rigid and stable mounting point, reducing flex for a consistent steering feel with high-torque direct drive wheelbases.
SimXPro DD Front Mount Universal 580 - 600 mm
