SimXPro Light Triple Screen Setup: VESA 75-100 Guide
By SimXPro l Sim Racing Shop | Published: 2026-10-28
Category: How-to Guides
Learn how to install the SimXPro Light Triple Screen Setup for VESA 75-100 monitors, including alignment, cable management, and common mistakes to avoid.
Quick Answer
For a clean triple-screen sim racing setup with 27-inch VESA 75-100 monitors, the SimXPro Light Triple Screen Setup is a compact freestanding stand that keeps your screens stable and independent from cockpit vibrations.
Why Choose the Light Triple Screen Setup?
The SimXPro Light Triple Screen Setup is designed for monitors up to 27 inches, making it a great fit for many sim racers. Its freestanding design means the stand does not attach to your cockpit, so force feedback vibrations from your wheel base won't shake the monitors. This helps maintain a consistent wraparound field of view, which is crucial for immersion and accurate depth perception.
Because it uses premium aluminium profiles, the stand is both sturdy and relatively lightweight. This makes it easier to position and adjust compared to heavier mounts, while still providing the stability you need for a fixed monitor setup.
VESA 75-100 Compatibility: What to Check
Before you start, confirm your monitors have a VESA pattern of 75x75mm or 100x100mm. The SimXPro Light Triple Screen Setup supports both, but you should verify the hole spacing on the back of your monitors. Also, check the weight of your monitors—the stand is designed for up to 27-inch displays, so heavier or larger screens may not be suitable.
If your monitors use a different VESA pattern, like 200x200mm, this stand won't fit. In that case, you'd need a different mount, such as the SimXPro Heavy Triple Monitor Mount, which supports VESA 75-100-200.
Installation Steps for the SimXPro Light Triple Screen Setup
- Unpack and Inventory Parts: Lay out all components and verify you have the aluminium profiles, brackets, bolts, and tools listed in the manual. Check for any shipping damage before starting. Missing parts? Contact support before assembly.
- Assemble the Base Frame: Connect the base profiles according to the manual, ensuring all joints are square. Use a carpenter's square to check 90-degree angles. A crooked base will cause misalignment later.
- Attach the Vertical Uprights: Mount the vertical profiles to the base, making sure they are perpendicular. Tighten bolts firmly but don't over-torque—aluminium can strip. Use a level to confirm uprights are vertical.
- Install the Monitor Mounting Brackets: Attach the VESA 75-100 brackets to the uprights at a comfortable working height. Leave bolts slightly loose for adjustment. Don't fully tighten yet—you'll need to fine-tune alignment.
- Mount the Monitors: Carefully attach each monitor to its bracket, using the correct VESA screws. Support the monitor while tightening to prevent drops. Check that the screws are snug but not over-tightened.
- Adjust Screen Angles and Heights: Set the side monitors at the desired angle (typically 60 degrees from center) and adjust heights so the screens align horizontally. Tighten all adjustment knobs. Use a laser level or a straight edge to ensure the tops align.
- Route Cables and Finalize: Route monitor cables along the profiles using cable clips or zip ties. Do a final check of all bolts and make sure the stand is stable on the floor. Cables should not pull on the monitor connectors.
Product at a Glance
- SimXPro Light Triple screen setup VESA 75 - 100: The SimXPro Light Triple Screen Setup is a compact freestanding triple monitor stand for three displays up to 27 inches, with VESA 75/100 compatibility. This stand keeps your monitors stable and independent from cockpit movement, ensuring your field of view stays consistent during intense racing.
SimXPro Light Triple screen setup VESA 75 - 100
