How to Mount a Universal Wheel Plate on Your SimXPro Rig

By SimXPro l Sim Racing Shop | Published: 2026-10-29

Category: How-to Guides

Learn step-by-step how to install a SimXPro universal wheel plate on your sim racing rig. Get a rigid, compact mounting platform for most wheelbases.

Quick Answer

Mount your SimXPro universal wheel plate using the included hardware and a hex key. Align the plate's universal mounting pattern with your wheelbase, tighten bolts evenly, and check for flex before finalizing.

Why Use a Universal Wheel Plate?

The SimXPro universal wheel plate creates a rigid and compact mounting platform for your wheelbase. Designed for sim racing cockpits with an internal width of 420 mm, this lightweight steel plate is ideal for compact rigs and custom DIY builds. Its universal mounting pattern supports most major wheelbases available on the market.

What You Need

You will need the SimXPro universal wheel plate, a hex key (typically 5 mm or 6 mm), the bolts and washers that came with your wheelbase, and your sim rig's crossbar or mounting brackets. The plate can be installed in either orientation, providing additional flexibility.

Step-by-Step Installation Guide

Prepare the Rig and Plate: Remove any existing wheel mounting bracket from your sim rig. Slide the SimXPro universal wheel plate onto the crossbar or mounting brackets of your cockpit. Ensure the plate is centered and the internal width matches the 420 mm spacing. Common mistake: Skipping centering can cause uneven weight distribution and flex.
Align the Wheelbase: Place your wheelbase onto the plate. Align the mounting holes on the wheelbase with the universal pattern on the plate. Most wheelbases will fit without needing adapters. Checkpoint: If holes don't align, the plate supports mounting in either orientation—try flipping it.
Secure the Wheelbase: Insert the bolts from your wheelbase kit through the plate and into the wheelbase. Tighten them evenly using a hex key. Do not fully tighten one bolt before the others—this can cause misalignment. Common mistake: Overtightening can strip threads. Use hand-tight plus a quarter turn.
Attach the Plate to the Rig: Bolt the plate to your rig's crossbar using the provided hardware or your rig's mounting bolts. Tighten all fasteners securely. The plate's lightweight steel construction minimizes flex when properly fastened. Checkpoint: After tightening, try to wiggle the wheelbase. Any movement means you need to tighten further or add a shim.
Test and Adjust: Reconnect your wheelbase's power and USB cable. Turn on your sim software and test the wheel's range of motion. Listen for creaks or rattles. If you feel any play, recheck all bolts. Final check: Tighten bolts again after the first hour of use—they can settle as the plate beds in.

Product Fact

SimXPro Universal wheel plate - 420mm: SimXPro Universal Wheel Plate - 420 mm. Designed for sim racing cockpits with an internal width of 420 mm, this lightweight steel plate supports most major wheelbases. You can mount almost any wheelbase without drilling custom holes, saving time and ensuring a secure fit.
SimXPro Universal wheel plate - 420mm