How-to Guides 2026-11-21 SimXPro l Sim Racing Shop 0 views
SimXPro VESA Mount 75-100: Compatibility Guide
Learn which monitors and stands work with the SimXPro Standard VESA Mount (75x75 and 100x100 mm patterns). Includes fitment details and installation tips.
SimXPro VESA Mount 75-100: Compatibility FAQ
Which VESA patterns does the SimXPro Standard VESA Mount support?
The mount is compatible with 75 × 75 mm and 100 × 100 mm VESA patterns. These are the two most common sizes, but always check your monitor’s VESA specification before ordering.
Which monitor stands are compatible with this mount?
The SimXPro Standard VESA Mount works with all SimXPro monitor stands and any other stand built from 40 × 40 mm or 40 × 80 mm aluminium profiles. It is also a good choice for DIY simulator builds using those profile sizes.
What material is the mount made from?
It is made from premium 3 mm hardened steel with a durable matt-black powder coating. This provides a rigid and reliable connection between the monitor and the profile frame.
Can I adjust the screen angle after installation?
Yes. Two M8 sliding connections allow the screen angle to be adjusted for accurate alignment. The bracket can also be installed upright or upside down for greater mounting flexibility.
Does the mount work with monitors that have a non-standard VESA pattern?
The supplied information confirms compatibility only with 75 × 75 mm and 100 × 100 mm VESA patterns. If your monitor uses a different pattern, this mount will not fit without an adapter (not included or confirmed).
What is the thickness of the steel?
The mount is made from 3 mm hardened steel. This thickness contributes to its rigidity and helps prevent flex under the weight of the monitor.
Key Specifications at a Glance
SimXPro VESA mount 75 - 100 standard: Compatible with 75 × 75 mm and 100 × 100 mm VESA patterns This determines which monitors you can attach. Measure your monitor's VESA hole spacing before purchase.
SimXPro VESA mount 75 - 100 standard
SimXPro VESA mount 75 - 100 standard: Made from premium 3 mm hardened steel with a durable matt-black powder coating The steel thickness and coating ensure a sturdy, corrosion-resistant mount that stays rigid under load.
SimXPro VESA mount 75 - 100 standard: Compatible with all SimXPro monitor stands and stands built from 40 × 40 mm or 40 × 80 mm aluminium profiles If you have a SimXPro stand or a DIY rig using those profile sizes, this mount will bolt directly on without extra adapters.
SimXPro VESA mount 75 - 100 standard: Two M8 sliding connections allow the screen angle to be adjusted for accurate alignment You can fine-tune the monitor tilt after installation, which is useful for matching viewing angles across multiple screens.