What the SimXPro 2x Cross-Connector Plate Does
The SimXPro 2x Cross-Connector Plate is a 3 mm thick steel plate designed to connect aluminum profiles in a sim racing cockpit frame. It works with 40, 80, and 120 series profiles, making it a versatile component for building a rigid, clean-looking rig. The plate helps you create a reliable racing simulator setup by providing a strong junction between uprights or horizontal profiles and vertical profiles.
Key Specifications
- SimXPro 2x Cross - Connector Plate 3mm - 40 - 80 - 120 Black: SimXPro 2x Cross Connector Plate 3mm 40 to 80 to 120 Black The 3 mm thickness adds stiffness at profile joints, reducing flex in your cockpit frame. Compatibility with 40, 80, and 120 profiles means you can use it across different rig builds.

SimXPro 2x Cross - Connector Plate 3mm - 40 - 80 - 120 Black
How to Use the Cross-Connector Plate in Your Build
The plate is designed to mount uprights or horizontal 4040 profiles onto vertical profiles. Follow these general steps for a clean installation.
- Position the plate: Place the cross-connector plate at the junction where two profiles meet. Align the holes with the profile channels.
- Insert bolts and T-nuts: Use M8 or appropriate hardware (not included) to fasten the plate to the profiles. Slide T-nuts into the profile channels and tighten bolts through the plate.
- Tighten evenly: Tighten all bolts gradually to avoid bending the plate. The 3 mm steel provides a solid connection without excessive weight.
Where to Use It in Your Cockpit Frame
The SimXPro 2x Cross-Connector Plate is best used at corner joints where a vertical profile meets a horizontal one. For example, you can connect the uprights of a wheel deck to the base frame, or attach a monitor stand upright to the rig's main chassis. Using these plates at multiple joints increases overall frame stiffness, especially on longer spans where flex is more noticeable.
What the Supplied Information Confirms
Based on the available product details, here is what you can expect:
- Clean mounting and practical fitment: The plate is designed for a neat, low-profile connection that keeps your rig looking organized.
- Compatible with 40, 80, and 120 profiles: You can use the same plate for different profile sizes, making it a flexible choice for custom builds.
- Designed for cockpit and rig builds: The plate is specifically made for sim racing cockpits, not general construction.
What the Supplied Information Does Not Cover
The available product details do not include specific torque settings, exact bolt sizes, or step-by-step instructions for every possible configuration. For best results, use standard M8 hardware and tighten until the joint feels solid without over-stressing the aluminum profile. If you need precise guidance, consult your profile manufacturer's recommendations or the hardware supplier's instructions.


