What the SimXPro GT-RS Triple Monitor Mount Does
The SimXPro GT-RS Triple Monitor Mount is an integrated accessory designed specifically for the SimXPro GT-RS cockpit. It positions three monitors directly above the wheel deck, creating a compact triple-screen sim racing setup with a wide, wraparound field of view and no separate floor stand. This mount helps you build a clean, space-saving triple display rig without extra support legs.
If you are still deciding between a single or triple monitor configuration, the mount's purpose-built design makes it a natural choice for the GT-RS cockpit once you've confirmed your display setup.
Key Specifications at a Glance
- SimXPro GT - RS Triple monitor mount: The monitor assembly can be positioned up to 360 mm above the wheel deck. This vertical adjustment range helps you achieve a natural viewing distance and clean bezel alignment, which is critical for an immersive triple-screen experience.

SimXPro GT - RS Triple monitor mount - SimXPro GT - RS Triple monitor mount: The mount is designed exclusively for the SimXPro GT-RS cockpit. Compatibility is limited to this specific cockpit model. If you own a different rig, this mount will not fit without modification.
- SimXPro GT - RS Triple monitor mount: Premium powder-coated aluminium profiles combined with reinforced steel and aluminium brackets create a strong, rigid and durable structure. A rigid mount minimizes monitor movement and maintains consistent alignment during demanding racing sessions, which is essential for a stable triple-screen field of view.
Mounting the Triple Monitor Mount on Your GT-RS Cockpit
The following steps are based on the mount's design and supplied compatibility information. Always refer to the manufacturer's instructions for exact torque values and assembly sequence.
- 1. Prepare the cockpit and mount: Ensure your SimXPro GT-RS cockpit is fully assembled and on a stable surface. Unpack the triple monitor mount and verify all components are present. The mount attaches directly to the wheel deck area of the GT-RS frame.
- 2. Attach the mount to the wheel deck: Position the mount's base over the wheel deck mounting points. Use the supplied hardware to secure it. The mount is designed to integrate without separate floor stands, so the cockpit itself provides the stability.
- 3. Install the three monitors: Attach each monitor to the mount's VESA brackets. The mount supports tilt and slide adjustment, allowing you to position each screen around the driver's eye line and preferred field of view.
- 4. Adjust height and alignment: Use the vertical adjustment range (up to 360 mm above the wheel deck) to set the monitor height. Slide and tilt each monitor to align the bezels for a clean, continuous wraparound view.
- 5. Tighten all fasteners and test stability: Once alignment is satisfactory, tighten all bolts and adjustment knobs. Gently test each monitor for movement. The low-flex construction should keep everything rigid during racing.
Adjusting Tilt and Slide for Optimal Viewing
The mount includes tilt and slide adjustment for each monitor. This flexibility allows you to fine-tune the angle and position of each screen relative to your seating position. Start by setting the center monitor at eye level, then adjust the side monitors to create a smooth wraparound curve. The 360 mm vertical range gives you room to match your preferred seating height. Small adjustments to tilt can reduce glare and improve immersion.
What the Supplied Information Does Not Cover
The provided evidence does not include detailed step-by-step assembly instructions, torque specifications, or cable management guidance. For these details, consult the manual that ships with the mount. If you are planning to use monitors with non-standard VESA patterns or very large/heavy screens, verify compatibility before purchasing. The mount is designed exclusively for the SimXPro GT-RS cockpit; it will not fit other rigs without modification.


