SimXPro 2x M-165 Bracket: Rig Connection Uses Explained
By SimXPro l Sim Racing Shop | Published: 2026-11-02
Category: Product Reviews
A practical FAQ on where the SimXPro 2x M-165 Bracket earns its place in a sim rig, how it differs from corner brackets, and how to plan mounting points before you drill.
Quick answer
Use the SimXPro 2x M-165 Bracket where you need a clean, practical connection in a profile cockpit build, especially for joints that benefit from a wider bracket footprint than a standard corner plate. It is a build accessory, not a structural substitute for planning your profile layout first.
Where a 165 bracket makes more sense than a corner bracket
A corner bracket joins two profiles at a right angle. A 165 bracket is better thought of as a joint bracket for connections that need a longer mounting face or a different load path. In practice, that means using it where a compact corner plate would leave too little material around the fasteners or where you want the joint to sit flush with the profile instead of wrapping the outside corner.
The trade-off is planning time. Because the bracket is longer, it needs clear space along the profile and a thought-out bolt pattern. If your rig is already assembled and you are adding a single accessory, a smaller bracket is often quicker. If you are designing a subframe or a monitor support from scratch, the 165 bracket gives you more room to place mounting points.
What the catalog does and does not tell you
The supplied product record describes the SimXPro 2x M-165 Bracket as made for sim racing cockpit builds, with clean mounting and practical fitment. It does not list slot size, hole spacing, bolt diameter, or load ratings. Treat those as unknowns until you check the bracket against your own profile and hardware.
That absence matters. Do not assume the bracket matches every aluminium profile series. Measure your profile slot width and the spacing of your existing T-nuts before ordering, and test-fit one joint before committing to a full subframe.
M-165 bracket FAQ for sim rig builders
- Is the M-165 bracket a corner joint or a straight joint?
- The catalog does not specify the bracket geometry beyond clean mounting and practical fitment. Check the product images and your intended joint angle before ordering; if you need a right-angle corner, compare it with a dedicated corner bracket first. Confirm the joint angle before you drill or cut.
- How many 165 bracket mounting points should I plan for?
- Plan at least one bracket per joint and add a second where the joint carries a monitor arm, wheel deck, or other cantilevered load. The catalog does not list a load rating, so treat extra brackets as cheap insurance rather than a calculated fix. Add a second bracket at any joint that holds an arm or deck.
- Will it fit my existing aluminium profile?
- The record does not state slot size or hole spacing. Measure your profile slot and compare it with the bracket before purchase, and dry-fit one joint with your T-nuts and bolts before assembling the whole frame. Dry-fit one joint before building the full subframe.
- Can I use it to join two different profile sizes?
- The catalog does not list compatibility across profile series. If you are mixing sizes, check that the bracket face spans both profiles and that the fasteners can reach the slots; otherwise use a purpose-made adapter plate. Mixed profile sizes need a measured check, not an assumption.
- Is it worth buying the two-pack?
- The listing is for a 2x bracket set at USD 12.66, with a catalog comparison price of USD 19.47. If you are building a subframe, the pair covers both ends of a joint; if you only need one, the second is a spare for future changes. A pair covers both ends of a typical joint.
Product facts
- SimXPro 2x M - 165 Bracket: The SimXPro 2x M-165 Bracket is listed as made for sim racing cockpit builds with clean mounting and practical fitment. That positions it as a rig-build accessory rather than a generic hardware bracket, so it is worth planning around your profile layout before you buy.
SimXPro 2x M - 165 Bracket
