Back to Blog
Buying Guides 2026-11-21 SimXPro l Sim Racing Shop 0 views

SimXPro Mounting Hardware Kit: Contents & Use

SimXPro Mounting Hardware Kit: Contents & Use

A clear breakdown of what you get in the SimXPro Mounting Hardware Kit, including bolt lengths and T-nut types, and how it fits into your sim rig build.

What the Kit Contains

The SimXPro Mounting Hardware Kit is a small but essential set of fasteners for sim racing enthusiasts building or upgrading their cockpit. It includes 4 T-nuts, 4 M8 10.8 grade bolts, and 4 ballbearing T-nuts, all M8 size. The bolts are available in either 12mm or 16mm length, letting you match the fastener to the thickness of the material you're joining.

Kit Specifications

  • SimXPro Mounting Hardware Kit: Includes 4 T-nuts, 4 M8 10.8 grade bolts (12mm or 16mm length), and 4 ballbearing T-nuts M8. This tells you exactly how many fasteners you get and the grade of the bolts, which is important for structural integrity in a vibrating sim rig.
    SimXPro Mounting Hardware Kit
    SimXPro Mounting Hardware Kit
  • SimXPro Mounting Hardware Kit: Available in 12mm or 16mm bolt length. Choosing the right length depends on the thickness of the profiles or brackets you are fastening. 12mm suits thinner materials, 16mm works for slightly thicker sections or where you need extra thread engagement.

Choosing the Right Bolt Length

The two bolt length options – 12mm and 16mm – are the main decision point when buying this kit. If you are attaching components to standard 15-series aluminum profile, the 12mm bolts are usually sufficient for brackets and light hardware. The 16mm bolts give you more thread engagement, which can be useful when fastening thicker brackets or when using the ballbearing T-nuts that sit deeper in the slot. There is no supplied guidance on exact material thickness compatibility, so check your profile slot depth and bracket thickness before ordering.

12mm vs 16mm Bolt Length

  • 12mm bolts: Better for thinner brackets and standard T-nut applications where the bolt does not need to reach far into the slot.
  • 16mm bolts: Provide extra thread engagement for thicker brackets or when using ballbearing T-nuts that require a longer reach.

What the Kit Does Not Include

This is a hardware-only kit. It does not include washers, lock washers, nuts (other than the T-nuts), or any tools. You will need to supply your own hex key or socket for the M8 bolts. The kit is designed for sim racing cockpits using aluminum profile, but the supplied information does not specify exact profile compatibility or load limits. For critical structural connections, always verify that the bolt length provides adequate thread engagement without bottoming out.

Related Articles

Customer Service
Home
Products
Cart
Profile